Solna D300
Solna D300
The Solna D300 is one of the two most sold printing units ever in the single-round, single-width cold-set segment. The durable and high quality design has proved itself over decades. The design is based on horisontal web leads, ergonomic design, and high printing quality and fast make-ready.
The folders used together with D300 are the F303, the F302 or the F301. The F303 has a 1:2:2 folder wich allowes a production speed of 40.000 copies/hour. The folder has retractable folding knifes, during run adjustable over and under lap. The F302 and F301 (1:2:2) are folders for newspaper production with durable design. All folders can be equipped with upper former for second and third section.
The D300 can be connected to all existing Solna Distributor presses, as add on, to extend your number of four colour pages. This is done with a special electrical converting kit that allows the D300 to communicate with the existing press line.
The Solna D300 is used for a variety of different production alternatives: book printing, newspaper printing, semi- and commercial work. Everything from manuals, glossy catalogues, magasines and newspapers are printed in Solna D300-presses.
Solna D300
Configuration:Horisontal web lead, 1+1 and 2+1 units
Cut off: 546 mm (21” ½), 560 mm (22” 3/64), 578 mm (22” ¾), 630 mm (24” 3/16)
Production speed: 35.000 rph
Drive system: Shafted
Printing Units
- Cast iron precision machined, sturdy side frames
- Blanket cylinders in solid steel, nickel plated with reel type lock up
- Plate cylinders in solid steel, nickel plated with gripper plate lock-up for panorama and half plates
- Pre-loaded cylinder bearings of multi row type
- Multi range eccentric system for easy change of paper thickness
- Manual or fully remote controlled
- Inking system with form rollers
- Motorised, individually operated ink fountain rollers
- Oil lubrication of cascade type
- Web brake detectors
- Safety guards according to European Union safety regulations
F302 folder F302
- Jaw folder mechanism for broadsheet and tabloid products
- Pneumatically operated steel nip rollers on R.T.F. roller
- Newspaper former (short) with air in former nose and bars including blower for air in former bars
- Slitter and perforator wheel on R.T.F. roller
- Cross perforation in tabloid fold
- Safety guards
- Delivery table
- Motorised cut-off compensator for the first web in the F302 folder
Options
- Quarter folder mechanism
- Longitudinal perforation of quarter fold products
- Additional cylinder for double parallel folding
- Arrangement to cut double parallel products
- Stitcher for tabloid fold
- Automatic print-to-cut register
- Gluing device for broadsheet and/or quarter folded products
- Cross perforation device below former for perforation in tabloid or double parallel fold
- Motorised cut-off compensators for web 2–8 positioned in the superstructure of the printing units in combination with F302 folder
- Motorised cut-off compensator for a second web in the F302 folder for a press with a two-web dryer
BAF340 folder
BAF340
- Jaw folder mechanism for broadsheet and tabloid products
- Motorised cut-off compensator for the first web (cut-off compensators for web 2–8 are mounted in the printing unit superstructure)
- Pneumatically operated nip rollers on both R.T.F. rollers
- Two formers for the production of a two-section newspaper
- Air in former nose and bars including blower for air in former bars
- Slitter and perforator wheel on both R.T.F. rollers
- Cross perforation in tabloid fold
- Safety guards
- Delivery table
Options:
- Quarter folder mechanism
- Angle bar arrangement for a third newspaper section
- Longitudinal perforation of quarter fold products
- Stitcher for tabloid, positioned below the upper and lower former
- Glue applicator for broadsheet products
F303 folder F303
- Jaw folder mechanism for broadsheet and tabloid signatures
- Short former with adjustable nose
- Air in former nose and bars including blower for air in former bars
- Variable speed R.T.F.
- Pneumatically operated truck rolls on the R.T.F., steel or rubber
- Slitter and perforator wheel on the R.T.F.
- Cross perforation in tabloid fold adjustable on-the-run
- Pneumatically operated nip rollers under the former
- Signature overlap adjustment on-the-run, delivery table with variable speed control
- Retractable tucker blades in tabloid folder
- Optic anti-jamming device
- Safety guards
- Web severing device
Options:
- Quarter folder mechanism with automatic timing of the quarter fold mechanism, on-the-run
- Double parallel folder and perforation in the spine of a double parallel folded signature, on-the-run
- Longitudinal perforation of quarter fold signatures
- Softening device for the quarter fold position
- Stitching device for tabloid
- Automatic cut-off control
- Gluing device for broadsheet and quarter folded signatures
- Additional motorised cut-off compensator and draw roller in the folder superstructure for a second web or ribbon, commercial performance
- Motorised cut-off compensators and draw rollers for up to 8 webs (webs 2–8 are positioned on top of the printing units)
- Draw rollers for a maximum of 6 webs from the right
